lulzette/meteoBack
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

actually it works, problem was dead ds18b20

Browse Source
This commit is contained in:
l0sted 2018-05-29 16:17:20 +03:00
parent 44a9d8b079
commit 83331ff0d9
3 changed files with 47 additions and 60 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
.vscode/arduino.json vendored
View File

@ -1,6 +1,6 @@
{
"board": "esp8266:esp8266:generic",
"configuration": "CpuFrequency=80,FlashFreq=40,FlashMode=dio,UploadSpeed=115200,FlashSize=512K64,ResetMethod=ck,Debug=Disabled,DebugLevel=None____",
"configuration": "CpuFrequency=160,FlashFreq=80,FlashMode=dio,UploadSpeed=115200,FlashSize=2M,ResetMethod=ck,Debug=Disabled,DebugLevel=None____",
"sketch": "src/backend.ino",
"output": "Output",
"port": "/dev/ttyUSB0"

13
.vscode/settings.json vendored Normal file
View File

@ -0,0 +1,13 @@
{
"files.associations": {
"array": "cpp",
"hash_map": "cpp",
"hash_set": "cpp",
"rope": "cpp",
"slist": "cpp",
"initializer_list": "cpp",
"string_view": "cpp",
"valarray": "cpp",
"*.tcc": "cpp"
}
}

72
src/backend.ino
View File

@ -1,11 +1,3 @@
/*
todo
* sleep
*
*/
#include <BH1750.h>
#include <BMP280.h>
#include <Wire.h>
@ -24,22 +16,7 @@ todo
float inTemp,humid,extTemp;
double bmpTemp,pressure,altitude,lux;
const short ds18pin = 4, bmpsda = 5, bmpscl = 14, lightSCL = 13, lightSDA = 12, dhtpin = 15;
/*
light connection:
VCC -> 3V3 or 5V
GND -> GND
SCL -> SCL (A5 on Arduino Uno, Leonardo, etc or 21 on Mega and Due, on esp8266 free selectable)
SDA -> SDA (A4 on Arduino Uno, Leonardo, etc or 20 on Mega and Due, on esp8266 free selectable)
ADD -> (not connected) or GND
ADD pin is used to set sensor I2C address. If it has voltage greater or equal to
0.7VCC voltage (e.g. you've connected it to VCC) the sensor address will be
0x5C. In other case (if ADD voltage less than 0.7 * VCC) the sensor address will
be 0x23 (by default).
*/
const short ds18pin = 14, bmpsda = 5, bmpscl = 4, dhtpin = 14;
BMP280 bmp;
@ -56,10 +33,12 @@ Adafruit_MQTT_Publish bmpTempMQTT = Adafruit_MQTT_Publish(&mqtt, "bmpTemp");
Adafruit_MQTT_Publish pressureMQTT = Adafruit_MQTT_Publish(&mqtt, "pressure");
Adafruit_MQTT_Publish lightMQTT = Adafruit_MQTT_Publish(&mqtt, "light");
BH1750 lightMeter;
BH1750 lightMeter(0x23);
void setup(){
Serial.begin(115200);
Serial.setTimeout(2000);
//==WIFI CONNECT==
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
@ -81,21 +60,26 @@ void setup(){
bmp.setOversampling(4);
}
Wire.begin(lightSCL, lightSDA);
if (!lightMeter.begin())
// Wire.begin(lightSCL, lightSDA);
if (!lightMeter.begin(BH1750::CONTINUOUS_HIGH_RES_MODE))
Serial.println("lightMeter error!");
// short i = 0;
// while (i < 1) {
// ++i;
// }
// Serial.println("lets sleep for 30e6 us or 30 seconds");
// ESP.deepSleep(30e6);
}
void loop(){
// getDS18();
getBMP();
getLight();
MQTT_loop();
getAccurateDHT();
serialPrint();
// getDS18();
serialPrint();
getBMP();
serialPrint();
getLight();
serialPrint();
MQTT_loop();
}
@ -125,21 +109,17 @@ void serialPrint() {
Serial.println("====");
Serial.println("BMP280 Temperature: " + String(bmpTemp) + "degC");
Serial.println("Pressure: " + String(pressure) + "mBar");
Serial.println("Altitude: " + String(altitude) + "m");
Serial.println("DS18B20 Temperature: " + String(extTemp) + "degC");
Serial.println("DHT11 Temperature: " + String(inTemp) + "degC");
Serial.println("Humidity" + String(humid) + "%");
Serial.println("Humidity: " + String(humid) + "%");
Serial.println("Light:" + String(lux)+"lux");
}
void getAccurateDHT(){
humid = 0.0;
inTemp = 0.0;
for (int i = 0;i < 3; ++i) { //i dunno why it is incorrect sometimes
delay(dht.getMinimumSamplingPeriod());
humid += (dht.getHumidity())/3.0;
inTemp += (dht.getTemperature())/3.0;
}
// do {
humid = (dht.getHumidity());
inTemp = (dht.getTemperature());
// } while ((humid == NAN)||(inTemp == NAN));
}
void MQTT_loop() {
MQTT_connect();
@ -170,14 +150,9 @@ void MQTT_loop() {
void MQTT_connect() {
int8_t ret;
// Stop if already connected.
if (mqtt.connected()) {
return;
}
// Serial.print("Connecting to MQTT... ");
uint8_t retries = 3;
while ((ret = mqtt.connect()) != 0) { // connect will return 0 for connected
Serial.println(mqtt.connectErrorString(ret));
@ -186,7 +161,6 @@ void MQTT_connect() {
delay(5000); // wait 5 seconds
retries--;
if (retries == 0) {
// basically die and wait for WDT to reset me
while (1);
}
}