2018-05-07 23:01:41 +03:00
# include <ESP8266WiFi.h>
# include <WiFiClient.h>
# include <ESP8266mDNS.h>
# include <NTPClient.h>
# include <WiFiUdp.h>
# include "SSD1306Brzo.h"
// #include <ArduinoJson.h>
// #include <FS.h>
2018-05-08 12:48:25 +03:00
# include "../wifi.h" //not working :/
2018-05-07 23:01:41 +03:00
# include "Adafruit_MQTT.h"
# include "Adafruit_MQTT_Client.h"
double inTemp , outTemp , pressure , humid ;
short int onTime = 5 , offTime = 23 , beepDelay = 1 , lastNtp , lastBeep ;
bool mqttAvail ;
WiFiUDP ntpUDP ;
NTPClient timeClient ( ntpUDP ) ;
SSD1306Brzo display ( 0x3C , 4 , 5 ) ; //oled display w/ address 0x3C with SDA on GPIO4 and SCL on GPIO5 //address == offset
2018-05-08 12:48:25 +03:00
// Ticker dispUpd; //i tried ticker for 91 line but it crashes every time it launch
2018-05-07 23:01:41 +03:00
WiFiClient client ;
Adafruit_MQTT_Client mqtt ( & client , " 192.168.100.102 " , 1883 ) ;
Adafruit_MQTT_Subscribe pressureFeed = Adafruit_MQTT_Subscribe ( & mqtt , " pressure " ) ;
Adafruit_MQTT_Subscribe inFeed = Adafruit_MQTT_Subscribe ( & mqtt , " bmpTemp " ) ;
Adafruit_MQTT_Subscribe outFeed = Adafruit_MQTT_Subscribe ( & mqtt , " externalTemp " ) ;
Adafruit_MQTT_Subscribe humidFeed = Adafruit_MQTT_Subscribe ( & mqtt , " humid " ) ;
void wifiConnect ( ) {
int beginMillis = millis ( ) ;
WiFi . begin ( ssid , password ) ;
while ( WiFi . status ( ) ! = WL_CONNECTED & & millis ( ) - beginMillis < 30000 ) {
delay ( 250 ) ;
displayStatus ( 1 ) ;
Serial . print ( " . " ) ;
}
if ( WiFi . status ( ) ! = WL_CONNECTED ) {
displayStatus ( 2 ) ;
delay ( 10000 ) ;
ESP . reset ( ) ;
}
MDNS . begin ( " esp8266-frontend " ) ;
Serial . println ( " Connected to " + String ( ssid ) + " ; IP address: " ) ;
displayStatus ( 0 ) ;
Serial . print ( WiFi . localIP ( ) ) ;
}
void setup ( ) {
Serial . begin ( 115200 ) ;
//==DISPLAY INIT==
display . init ( ) ;
display . flipScreenVertically ( ) ;
display . setContrast ( 255 ) ;
//==WIFI CONNECT==
WiFi . mode ( WIFI_STA ) ;
wifiConnect ( ) ;
//==READ CONFIG==
// if (!readConfig()) {
// Serial.println("can't load config!");
// defConf();
// }
//==NTP INIT==
timeClient . begin ( ) ;
timeClient . setTimeOffset ( 10800 ) ;
//MQTT
pressureFeed . setCallback ( pressureCall ) ;
inFeed . setCallback ( inCall ) ;
outFeed . setCallback ( outCall ) ;
humidFeed . setCallback ( humidCall ) ;
mqtt . subscribe ( & pressureFeed ) ;
mqtt . subscribe ( & outFeed ) ;
mqtt . subscribe ( & inFeed ) ;
mqtt . subscribe ( & humidFeed ) ;
2018-05-07 23:13:41 +03:00
2018-05-07 23:01:41 +03:00
Serial . println ( ESP . getFlashChipRealSize ( ) ) ;
}
void loop ( ) {
if ( WiFi . status ( ) ! = WL_CONNECTED ) {
// displayStatus(1);
wifiConnect ( ) ;
}
MQTT_connect ( ) ;
mqtt . processPackets ( 500 ) ;
if ( ! mqtt . ping ( ) ) {
mqtt . disconnect ( ) ;
}
2018-05-07 23:13:41 +03:00
mainScreen ( ) ; //it could be cool and smooth if we could update screen independently, in some kind of separate thread or smthn similar
2018-05-07 23:01:41 +03:00
if ( timeClient . getMinutes ( ) = = 0 & & timeClient . getSeconds ( ) < 5 & & ! nightMode ( ) & & lastBeep ! = timeClient . getHours ( ) ) { //beep
tone ( 15 , 1000 ) ;
delay ( 100 ) ;
noTone ( 15 ) ;
lastBeep = timeClient . getHours ( ) ;
}
updateNtp ( ) ;
}
//TODO
//AT LEAST MAKE IT WORK (show ui and get data + ntp) - compiling - ... - WORKS!!11
//debug -> release
//remove useless serial debug - DONE
//show wifi info on oled - DONE
//reset on not connected - DONE
//check connectivity during work and do actions - DONE
//beep hourly - DONE
2018-05-08 12:48:25 +03:00
//github - oh yeahhh
2018-05-07 23:01:41 +03:00
//second screen
//reconfig wifi if not found (start webserver and AP)
//load config
//webconfig (?)
//mqtt update interval
//GRAPH
/*
get json from server
~ 12 values
hourly values + hourly display
if pressure lowers then weather gonna be bad
if pressure uppers then weather gonna be good
*/
//CONFIG
/*
beep time
on time
off time
mqtt update interval
*/
//====================IN PROGRESS===================
void displayStatus ( int state ) {
display . clear ( ) ;
if ( state = = 0 ) {
display . setFont ( ArialMT_Plain_16 ) ;
display . setTextAlignment ( TEXT_ALIGN_CENTER ) ;
2018-05-08 12:48:25 +03:00
display . drawString ( 64 , 22 , " Connected! " ) ;
2018-05-07 23:01:41 +03:00
}
if ( state = = 1 ) {
display . setFont ( ArialMT_Plain_16 ) ;
display . setTextAlignment ( TEXT_ALIGN_CENTER ) ;
display . drawString ( 64 , 22 , " Connecting... " ) ;
}
if ( state = = 2 ) {
display . setFont ( ArialMT_Plain_16 ) ;
display . setTextAlignment ( TEXT_ALIGN_CENTER ) ;
display . drawString ( 64 , 22 , " Not connected! " ) ;
display . setFont ( ArialMT_Plain_10 ) ;
display . setTextAlignment ( TEXT_ALIGN_LEFT ) ;
display . drawString ( 0 , 53 , " we will die in 10s! :0 " ) ;
}
display . display ( ) ;
}
void mainScreen ( ) {
display . clear ( ) ;
if ( ! nightMode ( ) ) { //turn off screen at night
int x = ( timeClient . getHours ( ) * 60 + timeClient . getMinutes ( ) ) / 11 ;
//Time
display . setFont ( ArialMT_Plain_24 ) ;
display . setTextAlignment ( TEXT_ALIGN_CENTER ) ;
display . drawString ( 64 , 22 , timeClient . getFormattedTime ( ) ) ;
//progress bar
display . drawLine ( 0 , 22 , x , 22 ) ;
//external temp //top left
display . setFont ( ArialMT_Plain_10 ) ;
display . setTextAlignment ( TEXT_ALIGN_LEFT ) ;
display . drawString ( 0 , 0 , " o: " + String ( outTemp ) ) ;
//pressure //top right
display . setFont ( ArialMT_Plain_10 ) ;
display . setTextAlignment ( TEXT_ALIGN_RIGHT ) ;
display . drawString ( 128 , 0 , " p: " + String ( pressure ) ) ;
//inside temp //bottom left
display . setFont ( ArialMT_Plain_10 ) ;
display . setTextAlignment ( TEXT_ALIGN_LEFT ) ;
display . drawString ( 0 , 53 , " i: " + String ( inTemp ) ) ;
//humid //bottom right
display . setFont ( ArialMT_Plain_10 ) ;
display . setTextAlignment ( TEXT_ALIGN_RIGHT ) ;
display . drawString ( 128 , 53 , " h: " + String ( humid ) + " % " ) ;
}
display . display ( ) ;
}
// void secondDisplay() {
// display.clear();
// display.setFont(ArialMT_Plain_16);
// display.setTextAlignment(TEXT_ALIGN_CENTER);
// display.drawString(0, 30, timeClient.getFormattedTime());
// display.drawRect(0,18,128,53); //frame
// /*
// 128/12=10px
// 128x32 resolution
// 32-19=13px for graph
// */
// int x = 0;
// for (int i=0;i<12;++i){
// display.drawLine(x+i*10, y[x], x+i*10+10, y[x]);
// }
// }
//====================paused===================
// bool readConfig() {
// File configFile = SPIFFS.open("/config.json", "r");
// if (!configFile) {
// Serial.println("Failed to open config file");
// return false;
// }
// // size_t size = configFile.size();
// // if (size > 1024) {
// // Serial.println("Config file size is too large");
// // return false;
// // }
// // Allocate a buffer to store contents of the file.
// std::unique_ptr<char[]> buf(new char[size]);
// // We don't use String here because ArduinoJson library requires the input buffer to be mutable. If you don't use ArduinoJson, you may as well use configFile.readString instead.
// configFile.readBytes(buf.get(), size);
// StaticJsonBuffer<200> jsonBuffer;
// JsonObject& json = jsonBuffer.parseObject(buf.get());
// if (!json.success()) {
// Serial.println("Failed to parse config file");
// return false;
// }
// offTime = int(json["offTime"]);
// onTime = int(json["onTime"]);
// beepDelay = int(json["beepDelay"]);
// return true;
// }
// bool defConf() {
// StaticJsonBuffer<200> jsonBuffer;
// JsonObject& json = jsonBuffer.createObject();
// json["onTime"] = "6";
// json["offTime"] = "23";
// json["beepDelay"] = "60";
// File configFile = SPIFFS.open("/config.json", "w");
// if (!configFile) {
// Serial.println("Failed to open config file for writing");
// return false;
// }
// json.printTo(configFile);
// return true;
// }
//===================WELL DONE=======================
void MQTT_connect ( ) {
int8_t ret ;
// Stop if already connected.
if ( mqtt . connected ( ) ) {
return ;
}
Serial . print ( " Connecting to MQTT... " ) ;
uint8_t retries = 3 ;
while ( ( ret = mqtt . connect ( ) ) ! = 0 ) { // connect will return 0 for connected
Serial . println ( mqtt . connectErrorString ( ret ) ) ;
Serial . println ( " Retrying MQTT connection in 10 seconds... " ) ;
mqtt . disconnect ( ) ;
delay ( 10000 ) ; // wait 10 seconds
retries - - ;
if ( retries = = 0 ) {
// basically die and wait for WDT to reset me
while ( 1 ) ;
}
}
Serial . println ( " MQTT Connected! " ) ;
}
void pressureCall ( double x ) {
pressure = x ;
}
void inCall ( double x ) {
inTemp = x ;
}
void outCall ( double x ) {
outTemp = x ;
}
void humidCall ( double x ) {
humid = x ;
}
void updateNtp ( ) {
if ( lastNtp ! = timeClient . getHours ( ) ) {
timeClient . update ( ) ;
lastNtp = timeClient . getHours ( ) ;
}
}
bool nightMode ( ) {
if ( ( timeClient . getHours ( ) > offTime ) | | ( timeClient . getHours ( ) < onTime ) ) { //turn off screen between loaded time
return true ;
}
else
return false ;
}