pre removal

.vscode/arduino.json

@@ -1,7 +1,6 @@
 {
     "board": "esp8266:esp8266:generic",
-    "configuration": "CpuFrequency=160,FlashFreq=80,FlashMode=dio,UploadSpeed=115200,FlashSize=1M512,ResetMethod=ck,Debug=Disabled,DebugLevel=None____",
-    "port": "/dev/ttyUSB0",
+    "configuration": "xtal=80,vt=flash,exception=disabled,ssl=all,ResetMethod=ck,CrystalFreq=26,FlashFreq=40,FlashMode=qio,eesz=4M1M,led=2,sdk=nonosdk221,ip=lm2f,dbg=Disabled,lvl=None____,wipe=none,baud=921600",
     "sketch": "frontend.ino",
-    "output": "Output"
+    "port": "/dev/ttyUSB0"
 }

.vscode/settings.json

@@ -1,3 +1,6 @@
 {
-    "C_Cpp.intelliSenseEngineFallback": "Enabled"
+    "C_Cpp.intelliSenseEngineFallback": "Enabled",
+    "files.associations": {
+        "*.inc": "cpp"
+    }
 }

frontend.ino

@@ -1,260 +1,123 @@
 #include <ESP8266WiFi.h>
 #include <WiFiClient.h>
-#include <ESP8266WebServer.h>
-#include <ESP8266mDNS.h>
 #include <NTPClient.h>
 #include <WiFiUdp.h>
 #include "SSD1306Brzo.h" 
-#include <ArduinoJson.h>
-#include <FS.h>
 #include "wifi.h"
-#include "Adafruit_MQTT.h"
-#include "Adafruit_MQTT_Client.h"
+#include <ESP8266HTTPClient.h>
 
-double inTemp,outTemp,pressure,humid;
-unsigned short int onTime = 5, offTime = 23, beepDelay = 60, lastNtp, lastBeep;
-bool mqttAvail;
+String inTemp,outTemp,pressure,humid;
+const unsigned short int onTime=6, offTime=23, beepDelay=60, timeOffset=3;
+short int lastBeep;
+const String httpAddr="http://meteo-front:1880";
+int alarms[10]={660,1260};
+int alarmDuration(6);
+int alarmStop(0);
 
 WiFiUDP ntpUDP;
 NTPClient timeClient(ntpUDP);
-SSD1306Brzo display(0x3C, 4, 5); //oled display w/ address 0x3C with SDA on GPIO4 and SCL on GPIO5 //address == offset
-
-WiFiClient client;
-ESP8266WebServer server(80);
-Adafruit_MQTT_Client mqtt(&client, "192.168.100.102", 1883);
-
-Adafruit_MQTT_Subscribe pressureFeed = Adafruit_MQTT_Subscribe(&mqtt, "pressure");
-Adafruit_MQTT_Subscribe inFeed = Adafruit_MQTT_Subscribe(&mqtt, "bmpTemp");
-Adafruit_MQTT_Subscribe outFeed = Adafruit_MQTT_Subscribe(&mqtt, "externalTemp");
-Adafruit_MQTT_Subscribe humidFeed = Adafruit_MQTT_Subscribe(&mqtt, "humid");
-
-void wifiConnect() {
-  int beginMillis = millis();
-  WiFi.begin(ssid, password);
-  while (WiFi.status() != WL_CONNECTED && millis() - beginMillis < 30000) {
-    delay(250);
-    displayStatus(1);
-    Serial.print(".");
-  }
-  if (WiFi.status() != WL_CONNECTED) {
-    displayStatus(2);
-    delay(10000);
-    ESP.reset();
-  } else {
-    MDNS.begin("esp8266-frontend");
-    Serial.print("Connected to " + String(ssid) + "; IP address: ");
-    Serial.println(WiFi.localIP());
-    displayStatus(0);
-  }  
-}
+SSD1306Brzo display(0x3C, 5, 4);
+void demo();
 void setup(){
-  Serial.begin(115200);
   //==DISPLAY INIT==
   display.init();
   display.flipScreenVertically();
   display.setContrast(255);
+  // display.invertDisplay();
+  display.clear();
+  display.fillRect(0,0,128,64);
+  display.display();
+  delay(3000);
+  if (!digitalRead(0)) //button
+    demo(120000);
+  Serial.begin(115200);
+
   //==WIFI CONNECT==
   WiFi.mode(WIFI_STA);
-  wifiConnect();
-  //==READ CONFIG==
-  if (!SPIFFS.begin())
-    SPIFFS.format();
-
-  if (!readConfig()) 
-    defConfig();
-  
   //==NTP INIT==
   timeClient.begin();
-  timeClient.setTimeOffset(10800);
-  //MQTT
-  pressureFeed.setCallback(pressureCall);
-  inFeed.setCallback(inCall);
-  outFeed.setCallback(outCall);
-  humidFeed.setCallback(humidCall);
-  mqtt.subscribe(&pressureFeed);
-  mqtt.subscribe(&outFeed);
-  mqtt.subscribe(&inFeed);
-  mqtt.subscribe(&humidFeed);
-  server.on("/edit", editConfig);
-  server.begin();
+  timeClient.setTimeOffset(timeOffset*3600);
+  netTasks();
 }
 
 void loop(){
-  if (WiFi.status() != WL_CONNECTED) { //check wifi status
-    wifiConnect();
-  }
-  server.handleClient();
-  MQTT_connect();//check connection and get packets for 0.5s
-  mqtt.processPackets(500);
-
-  mainScreen();//it could be cool and smooth if we could update screen independently, in some kind of separate thread or smthn similar
-
-  if ((timeClient.getHours()*60 + timeClient.getMinutes() - lastBeep > beepDelay)&&(!nightMode())){ //beep every $lastBeep
+  mainScreen();
+  if (((timeClient.getHours()*60 + timeClient.getMinutes()) % beepDelay == 0)&&(timeClient.getSeconds() < 1)&&(!nightMode())){
+    tone(15,1000);
+    delay(100);
+    noTone(15);
     tone(15,1000);
     delay(100);
     noTone(15);
     lastBeep = timeClient.getHours()*60;
+    netTasks();
+    // demo(12000);
   }
-
-  updateNtp();//update time
+  else {
+    delay(500);
+  }
+  checkAlarm();
 }
-
-//TODO
-//AT LEAST MAKE IT WORK (show ui and get data + ntp) - compiling - ... - WORKS!!11
-
-//debug -> release
-//remove useless serial debug - DONE
-//show wifi info on oled - DONE
-//reset on not connected - DONE
-//check connectivity during work and do actions - DONE
-//beep hourly - DONE
-//github - oh yeahhh
-
-//load config
-//webconfig (?) - in progress
-//mqtt update interval
-
-//second screen
-
-//reconfig wifi if not found (start webserver and AP)
-
-//GRAPH
-/*
-get json from server
-~12 values
-hourly values + hourly display
-if pressure lowers then weather gonna be bad
-if pressure uppers then weather gonna be good
-*/
-
-//CONFIG
-/*
-beep time
-on time
-off time
-mqtt update interval
-
-*/
-
-
-//====================IN PROGRESS===================
-void editConfig(){
-  if (server.args() > 0 ) { 
-    for ( uint8_t i = 0; i < server.args(); i++ ){
-      String Argument_Name = server.argName(i);
-      String client_response = server.arg(i);
-
-      if (Argument_Name == "beepDelay"){
-        beepDelay = client_response.toInt();
+void checkAlarm()
+{
+  for (int i(0);i<10;i++)
+  {
+    if ((timeClient.getHours()*60+timeClient.getMinutes() >= alarms[i])&&(timeClient.getHours()*60+timeClient.getMinutes() - alarms[i] < alarmDuration)&&(alarms[i] != 0))
+    {
+      if (alarmStop != alarms[i])
+      {
+        tone(15,1000);
+        delay(100);
+        noTone(15);
+        delay(100);
+        tone(15,1000);
+        delay(100);
+        noTone(15);
+        delay(1000);
       }
-      if (Argument_Name == "onTime"){
-        onTime = client_response.toInt();
-      }
-      if (Argument_Name == "offTime"){
-        offTime = client_response.toInt();
-      }
-      updateConfig();
-      server.send(200, "text/plain", "updatedConfig");
+      if (!digitalRead(0)) //button
+        alarmStop = alarms[i];
+      if (timeClient.getHours()*60+timeClient.getMinutes() - alarms[i] > alarmDuration)//stop current alarm
+        alarmStop = -1;
     }
-  } else {
-    server.send(200, "text/plain", "to update config, goto " + String(WiFi.localIP()) + "/edit?parameter=value");
   }
 }
-
-bool updateConfig() {
-  StaticJsonBuffer<200> jsonBuffer;
-  JsonObject& json = jsonBuffer.createObject();
-  json["onTime"] = onTime;
-  json["offTime"] = offTime;
-  json["beepDelay"] = beepDelay;
-  File configFile = SPIFFS.open("/config.json", "w");
-  if (!configFile) {
-    Serial.println("Failed to open config file for writing");
-    return false;
+void netTasks() {
+  HTTPClient http;
+  WiFi.forceSleepWake();
+  if (WiFi.status() != WL_CONNECTED) {
+    wifiConnect(false);
   }
+  http.begin(httpAddr+"/inTemp");
+  if (http.GET() < 0)
+    return;
+  inTemp="i:"+http.getString()+"C";
+  http.end();
 
-  json.printTo(configFile);
-  return true;
+  http.begin(httpAddr+"/outTemp");
+  if (http.GET() < 0)
+    return;
+  outTemp="o:"+http.getString()+"C";
+  http.end();
 
+  http.begin(httpAddr+"/humid");
+  if (http.GET() < 0)
+    return;
+  humid="h:"+http.getString()+"%";
+  http.end();
+
+  http.begin(httpAddr+"/pressure");
+  if (http.GET() < 0)
+    return;
+  pressure="p:"+http.getString()+"mBar";
+  http.end();
+
+  updateNtp();
+  WiFi.disconnect();
 }
-
-bool readConfig() {
-  File configFile = SPIFFS.open("/config.json", "r");
-  if (!configFile) {
-    Serial.println("Failed to open config file");
-
-    return false;
-  }
-
-  size_t size = configFile.size();
-  if (size > 1024) {
-    Serial.println("Config file size is too large");
-    return false;
-  }
-
-  // Allocate a buffer to store contents of the file.
-  std::unique_ptr<char[]> buf(new char[size]);
-
-  // We don't use String here because ArduinoJson library requires the input buffer to be mutable. If you don't use ArduinoJson, you may as well use configFile.readString instead.
-  configFile.readBytes(buf.get(), size);
-
-  StaticJsonBuffer<200> jsonBuffer;
-  JsonObject& json = jsonBuffer.parseObject(buf.get());
-
-  if (!json.success()) {
-    Serial.println("Failed to parse config file");
-    return false;
-  }
-
-  offTime = int(json["offTime"]);
-  onTime = int(json["onTime"]);
-  beepDelay = int(json["beepDelay"]);
-  return true;
-  
-}
-bool defConfig() {
-  StaticJsonBuffer<200> jsonBuffer;
-  JsonObject& json = jsonBuffer.createObject();
-  json["onTime"] = "6";
-  json["offTime"] = "23";
-  json["beepDelay"] = "60";
-  File configFile = SPIFFS.open("/config.json", "w");
-  if (!configFile) {
-    Serial.println("Failed to open config file for writing");
-    return false;
-  }
-
-  json.printTo(configFile);
-  return true;
-}
-
-//====================paused===================
-
-
-// void secondDisplay() {
-//   display.clear();
-//   display.setFont(ArialMT_Plain_16);
-//   display.setTextAlignment(TEXT_ALIGN_CENTER);
-//   display.drawString(0, 30, timeClient.getFormattedTime());
-  
-//   display.drawRect(0,18,128,53); //frame
-// /*
-// 128/12=10px
-// 128x32 resolution
-// 32-19=13px for graph 
-// */
-//   int x = 0;
-//   for (int i=0;i<12;++i){
-//     display.drawLine(x+i*10, y[x], x+i*10+10, y[x]);
-//   }
-
-// }
-
-//===================WELL DONE=======================
 void mainScreen() {
   display.clear();
-  
-  if (!nightMode()) { //turn off screen at night
+  if (!nightMode()) {
     int x = (timeClient.getHours()*60+timeClient.getMinutes())/11;
     //Time
     display.setFont(ArialMT_Plain_24);
@@ -262,98 +125,99 @@ void mainScreen() {
     display.drawString(64, 22, timeClient.getFormattedTime());
     //progress bar
     display.drawLine(0,22,x,22);
-    if (mqttAvail){ //do not show info if mqtt not available
-      //external temp //top left
-      display.setFont(ArialMT_Plain_10);
-      display.setTextAlignment(TEXT_ALIGN_LEFT);
-      display.drawString(0, 0, "o:"+String(outTemp));
-      //pressure //top right
-      display.setFont(ArialMT_Plain_10);
-      display.setTextAlignment(TEXT_ALIGN_RIGHT);
-      display.drawString(128, 0, "p:"+String(pressure));
-      //inside temp //bottom left
-      display.setFont(ArialMT_Plain_10);
-      display.setTextAlignment(TEXT_ALIGN_LEFT);
-      display.drawString(0, 53, "i:"+String(inTemp));
-      //humid //bottom right
-      display.setFont(ArialMT_Plain_10);
-      display.setTextAlignment(TEXT_ALIGN_RIGHT);
-      display.drawString(128, 53, "h:"+String(humid)+"%");
-    }
-    else {
-      display.setFont(ArialMT_Plain_10);
-      display.setTextAlignment(TEXT_ALIGN_LEFT);
-      display.drawString(0, 53, "mqtt unavailable");
-    }
-  }
-  display.display();
-}
-
-void displayStatus(int state){
-  display.clear();
-  if (state == 0) {
-    display.setFont(ArialMT_Plain_16);
-    display.setTextAlignment(TEXT_ALIGN_CENTER);
-    display.drawString(64, 22, "Connected!");
-    
-  }
-  if (state == 1) {
-    display.setFont(ArialMT_Plain_16);
-    display.setTextAlignment(TEXT_ALIGN_CENTER);
-    display.drawString(64, 22, "Connecting...");
-  }
-  if (state == 2) {
-    display.setFont(ArialMT_Plain_16);
-    display.setTextAlignment(TEXT_ALIGN_CENTER);
-    display.drawString(64, 22, "Not connected!");
+    // external temp //top left
     display.setFont(ArialMT_Plain_10);
     display.setTextAlignment(TEXT_ALIGN_LEFT);
-    display.drawString(0, 53, "we will die in 10s! :0");
+    display.drawString(0, 0, outTemp);
+    //pressure //top right
+    display.setFont(ArialMT_Plain_10);
+    display.setTextAlignment(TEXT_ALIGN_RIGHT);
+    display.drawString(128, 0, pressure);
+    //inside temp //bottom left
+    display.setFont(ArialMT_Plain_10);
+    display.setTextAlignment(TEXT_ALIGN_LEFT);
+    display.drawString(0, 53, inTemp);
+    //humid //bottom right
+    display.setFont(ArialMT_Plain_10);
+    display.setTextAlignment(TEXT_ALIGN_RIGHT);
+    display.drawString(128, 53, humid);
   }
   display.display();
 }
+void displayStatus(){
+  bool run(true);
+  display.setFont(ArialMT_Plain_10);
+  display.setTextAlignment(TEXT_ALIGN_LEFT);
+  int x(0),y(0);
+  bool xd(false);//false - right, true - left
+
+  while (run)
+  {
+    display.clear();
+    if (WiFi.status() != WL_CONNECTED) {
+      display.fillRect(x,y,30,50);
+      if (x > 128-30)
+        xd = true;
+      if (x < 0)
+        xd = false;
+      if (xd) {
+        x--;
+      } else {
+        x++;
+      }
+
+      display.drawString(1, 52, ssid);
 
-void MQTT_connect() {
-  if (mqtt.connected()) {
-    return;
-  }
-  int8_t ret;
-  uint8_t retries = 3;
-  while ((ret = mqtt.connect()) != 0) {
-    displayStatus(3);
-    mqtt.disconnect();
-    delay(5000);
-    retries--;
-    if (retries == 0) {
-      mqttAvail = false;
     }
+    if (WiFi.status() == WL_CONNECTED) {
+      run = false;
+    }
+    display.display();
   }
-  if (mqtt.connected())
-    mqttAvail = true;
-}
-void pressureCall(double x) {
-  pressure = x;
-}
-void inCall(double x) {
-  inTemp = x;
-}
-void outCall(double x) {
-  outTemp = x;
-}
-void humidCall(double x){
-  humid = x;
+
 }
 void updateNtp() {
-  if (lastNtp != timeClient.getHours()) {
-    if (timeClient.update())
-      lastNtp = timeClient.getHours();
-  }
+  while (!timeClient.update())
+    Serial.println(timeClient.getHours());
 }
 bool nightMode() {
-  if ((timeClient.getHours() > offTime)||(timeClient.getHours() < onTime)) { //turn off screen between loaded time
+  if ((timeClient.getHours() > offTime)||(timeClient.getHours() < onTime)) {
     return true;
   }
   else 
     return false;
 }
+void wifiConnect(bool boot) {
+  int beginMillis = millis();
+  WiFi.begin(ssid, password);
+  displayStatus();
+}
 
+
+void demo(int duration)
+{
+  short xp(0),yp(0),xd(1),yd(1);
+  unsigned int startTime = millis();
+  bool run(true);
+  while (run) {
+    if ((xp > 128) || (xp < 0)) 
+      {
+          xd = xd * -1;
+      }
+    if ((yp > 64) || (yp < 0))
+      {
+          yd = yd * -1;
+      }
+    xp+=xd;
+    yp+=yd;
+
+    delay(10);
+    display.clear();
+    display.fillCircle(xp,yp,10);
+    display.display();
+
+    if (millis() - startTime > duration)
+      run = false;
+  }
+
+}

wifi.templ.h

@@ -0,0 +1,7 @@
+#ifndef ssid_pass_h
+#define ssid_pass_h
+
+const char* ssid = "";
+const char* password = "";
+
+#endif